SSP 200/500 FAST SET CONCRETE CRACK & SPALL REPAIR
SETS IN JUST 15 MINUTES!
SSP-200 is an extremely low viscocity polymer about the viscosity of water. It penetrates deep into the capillaries of concrete creating thousands of micro-anchor points when it hardens, effectively mending concrete failures.SSP-200 is a two component, 1:1 ratio, polymer that is hand-mixed and applied directly to concrete.
Typical Applications of SSP-500:
SSP-500 is slightly higher viscocity urethane polymer while still providing deep penetration value. It is denser than SSP-200 and has slightly more "body", making it well suited for smaller cracks, bolt holes, and other "neat" applications. SSP-500 has significantly higher resistance to impact than lower viscosity materials.The main feature of SSP-500 is that it is 100% ODOR FREE!!!....during mixing, application, and even grinding!
Repair Damage and Defects in New Slabs:
General Characteristics & Benefits of SSP
200/500 Concrete Repair Material
FAST & SIMPLE SURFACE PREPARATION REQUIREMENTS
VERY HIGH IMPACT RESISTANCE
WITHSTANDS HEAVY FLOOR GRINDING
APPLIED IN VERY COLD APPLICATIONS
HIGH STRENGTH BOND IN MINUTES
FLEXIBLE - NOT BRITTLE LIKE EPOXY
CAN BE FEATHER - EDGED
SAVES MAN HOURS & DOWN-TIME
LONG TERM DURABILITY
MEETS USDA REQUIREMENTS
PROVIDES SMOOTH & DURABLE SURFACE FOR FORK LIFTS
Finishing the SSP 200/500 repair flush using a planatary or small
The repair mends the crack or spall together with no cold joint
between the SSP and the concrete slab.
Only repair may be noticeable because of a slight discoloration.
Near exact color matching is achievable using Cam-O-Patch
colorants or unhanded colored grout powder available locally..
Repair Cracks and Cold Joints Prior to Epoxy Coatings
SSP-200 was used to repair extensive cracks throughout this Volvo dealership maintenance shop prior to
installing a 20 mil epoxy floor coating. Note that cracks do not telegraph thru the epoxy coating.